Poly-tex KOOL MART with Roll-up sides User Manual

INSTALLATION INSTRUCTIONSKOOL MART with roll-up sidesREV: AD-130315Poly-Tex Inc.27725 Danville AvenueP.O. Box 458Castle Rock, MN 55101US & Canada

KOOL MART WITH ROLL-UP SIDES1. Install the "V" brackets onto the center poles and intermediateframe sections by inserting them into the pre-

KOOL MART WITH ROLL-UP SIDES1. Install the "V" brackets onto the center poles and intermediateframe sections by inserting them into the pre-

21'-0"30"KOOL MART WITH ROLL-UP SIDESREV: AD-130315

IMPORTANT NOTE:LUMBER SUCH AS 2 x 4's, 2 x 6'sOR 1" THICK PLYWOOD MUST BE USEDTO HELP CONCENTRATE WATERTUBE WEIGHT OVER THE BENCHFRAMES

REV: AD-130315NOTE: IF THIS IS A NEW CONSTRUCTION, SKIP TO PAGE SEVEN1. After poly has been removed from the roof, remove screws and wiggle wire base

REV: AD-130315KOOL MART WITH ROLL-UP SIDESAfter installation of the frame sections, place SM4012 rails on the studs. Rails will be secured later.Faste

REV: AD-130315KOOL MART WITH ROLL-UP SIDES2"2"66"POLY CURTAINTUBE CLIPMARK FORROLL-UP TUBEPOLY CURTAINLENGTH ASREQUIREDFIGURE 2Unroll a

GUIDE & ROLL UP ASSEMBLYREV: AD-130315KOOL MART WITH ROLL-UP SIDESInsert KM2042 into the corner base until the snap button locks.Repeat for the ot

POLY INSTALLATIONREV: AD-130315KOOL MART WITH ROLL-UP SIDESWIGGLE WIREINSTALLEDTENSIONED POLYPOLY DROOPWIGGLE WIRENOT INSTALLED123Use an UP & DOWN

SAFETY GUIDELINESPLEASE READ THE INSTALLATION INSTRUCTIONS CAREFULLY BEFOREASSEMBLING THE STRUCTURE. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.This

KOOL MARTWith Roll-up sidesINDEXREV AD-130315Part Identification...1P

KM2000 - TOP INTERMEDIATE HOOPKM2001 - TOP END HOOPKM2005 - TOP END HOOP W/TABSKM2030 - INTERMEDIATE HOOPKM2008 - 6' DOOR SPACERKM2038 - RT CRN B

BMS1121 - 36" V BRACKETKHR1048 - HANGING BASKET "V" BRACKETBMS1130 - 18" SPIKEGM2803 - ROLLING DOOR HEADERFT3200 - FLAT STACKER CL

20'-0"REV: AD-13031520'-0"To assemble the base, connect corner bases, six footside bases, and twelve foot side bases to length ofg

KOOL MART WITH ROLL-UP SIDESKM2002KM2002KM2000INTERMEDIATE FRAME SECTIONROLL-UP DOOR ENDKHR1020KHR1021 (BALLAST)KHR1020KHR1021 (BALLAST)Lay parts out

STAND UP FRAME SECTIONSFirst, stand up one end frame section on the end 5" inserts.Next, stand up an intermediate frame section on the next 5&quo

KOOL MART WITH ROLL-UP SIDES1. Secure door to jambs using (6) cushion balls (NB1927) andcarriage bolts.2. Fasten top of door to header using wiggle wi